Home > Drive Not > Cd Drive Dvd Not Working

Cd Drive Dvd Not Working

Contents

Software and configuration issues can usually be solved with proper settings or reinstalling drivers. The instructions below applies to the following Microsoft Windows Operating Systems, however some instructions may slightly vary with older version of Microsoft Windows (Windows Vista or Windows XP): Microsoft Windows 10 To correct the problem and allow the software to detect the drive again, uninstall the CD/DVD recording software, restart the computer, reinstall the disc recording software, then restart the computer again. If listed with a yellow exclamation mark or red X, remove the CD-ROM by highlighting the drive and pressing the delete key. http://clearduplicatefiles.com/drive-not/cd-is-not-working-in-dvd-drive.html

This condition cannot be changed within the System Configuration Utility and must be corrected. If none is found, the system will boot to the hard disk drive. If your notebook computer has a battery that is sealed within the computer's case, a battery that cannot be removed easily, skip this step. Try the drive in another computer: If the drive fails in another system, the drive is defective.

Cd Drive Not Working Windows 7

If a LowerFilters value is listed on the right side of the Registry Editor window, select the LowerFilters value and press the Delete key. Wait until the computer fully shuts down, then disconnect the power cord from the computer. If Windows recognizes the CD/DVD drive, but the disc burning software does not detect the drive, refer to Software for burning discs does not recognize the drive. If a bootable disc (a disc with an operating system) is not found, the system will look for an operating system in the diskette drive.

Some drives have an emergency eject hole. Or time to buy a new dvd rom?21st November 2014 2:00pmdriversHelpif you are having trouble opening the cd tray then you can try accessing it from another program (such as a Double-click Display . Cd Drive Not Reading Disc If the system boots to the CD/DVD-ROM drive, this part of the computer system is working correctly.

If a drive name is shown with an alert icon (the drive icon is marked with an alert symbol ), double-click the drive name to find more information. Dvd Drive Not Working Windows 10 Ja Nein Schicken Sie uns Ihr Feedback. If the drive is still not detected, contact Dell Technical Support for In-Warranty repair options. dig this Turn on the computer and immediately press the F10 key repeatedly until the BIOS Setup Utility screen appears.

Problems with the CD/DVD-ROM in the operating system are likely the result of improper operating system configuration, not with the hardware. Cd Drive Not Showing Remove the side panel. If the drive tray is jammed, and the tray cannot be ejected and cleared manually, the drive should be replaced. Open My Computer (XP) or Computer (Vista) and check to see if your CD or DVD drives have returned.

Dvd Drive Not Working Windows 10

If the system does not boot to the disc in the CD/DVD-ROM drive, the CD/DVD-ROM drive, the cable, or the system board is defective. http://ccm.net/forum/affich-689426-cd-rom-dvd-drive-won-t-work-windows-7 If after cleaning the drive and CDs you still get errors, it is likely the disc drive is bad. Cd Drive Not Working Windows 7 note: If you have upgraded your computer to Windows 10 or to Windows8 and the drive was working before, but is no longer working correctly, you can save time by starting Cd Drive Not Working Windows 10 The Hardware and Devices troubleshooter is available in Microsoft Windows 7, Windows 8/8.1 & Windows 10 only.

Plug other things into the outlet or outlet strip and see if they work. navigate here Generally, DVD drives have proven to be a very reliable part of the computer system. Step 1: See if the drive appears in BIOS If a window does not open when discs are inserted into the drive and the drive does not appear in File Explorer, If Windows does not recognize the drive, repeat Step 2 to see if the drive name appears in Device Manager and troubleshoot disc burning software if needed. Cd Drive Not Working Windows 8

If the CD/DVD drive is listed as normal, with no special icons , Windows is detecting the drive but other software used to burn discs may not be detecting the drive. note: If you have a new notebook computer, make sure the computer actually has a CD/DVD drive. Outright failures are somewhat rare, so if you are having trouble with your DVD drive hopefully it is a minor problem that can be resolved by following the above steps. http://clearduplicatefiles.com/drive-not/cd-dvd-drive-not-working-in-xp.html Thanks to the large drivers database that such programs have, they are able to quickly locate the latest driver for any type of hardware device.

To troubleshoot the drive, see the CD and DVD drive troubleshooting section. Dvd Drive Not Detected To check the status of the DVD drive, open My Computer, right click the drive and select Properties. If the CD-ROM works in Safe Mode but not in normal Windows, it's likely another program is running that is causing the issue or that the drivers are corrupt.

Select Start, highlight Startup Sequence, and press Enter.

Windows will take additional steps to further troubleshoot these devices./ CD or other device and then copy them to the computer with no internet connection. blank Top Driver Fixes - Help with Common Driver Problems Fix Slow PC : Help Speed Up My PC How to Install Gateway Drivers : A Step-By-step GuideHow to Install NVIDIA Z7_3054ICK0KGTE30AQO5O3KA30N0 hp-concentra-wrapper-portlet Actions ${title} Loading... Cd Drive Not Opening For more instructions on how to disconnect and reconnect the CD, DVD or Blu-Ray drive, refer to the Dell knowledgebase article Instructions to Download and View Manuals.

Resetting the BIOS may also resolve this problem. The write function fails to work correctly. Check for bent or broken pins on the system board IDE/SATA controller and the CD/DVD-ROM. this contact form If the troubleshooter detects problems, follow the instructions to fix the problem.

Your feedback helps to improve this site. Make sure all drive jumpers are properly configured, including hard drives. (Master, Master with slave, Slave, or Cable Select). caution: This product contains components that can be damaged by electrostatic discharge (ESD).